Keystone/lippert frame flex
I am sure most of the people on here that are active are aware of the frame flex issue that runs across all manufactures of the large toy haulers and I am assume the regular trailer that utilize the frames.
I am prepping my Fuzion 417 to be picked up and taken back to Keystone’s west coast facility. I am also prepping documentation to take with me when i meet the trailer at the factory.
I have seen several pictures of peoples trailers while they were taken apart and i have seen several different repairs that are not consistent with then engineering drawings Keystone created.
Having said that I realize that depending on how bad the damage is in front of them is how they decide how many gussets need to be added in addition to then repair drawings.
Unfortunately, the best thing about the internet is also the worst thing about the internet: The volume of information available becomes so overwhelming that when you go back after a few days to capture it and print it you can never find the identical thing you were looking at the day before.
I am going to ask that any of you reading this who have pictures of your trailer or even somebody else’s trailer in the middle of repair for the frame flex issue if you could either post them on the thread or email them to me. I will circle back and post everything I can get my hands on and also will have a PDF available downstream that I can send to anybody else who has to deal with Keystone on this issue. If you have any information to share, please PM me so we can discuss the problems.
Thank You in advance for your time.