No heat from the floor registers.

[DanB6457]

We just bought a 2010 Keystone Bullet RK251, fired up the furnace and have heat blowing from just the vent closest to the furnace, no floor registers. I've gone through all the manuals that came with the trailer but, didn't find the answer. HELP!!

[Keystoned]

Find your heater and trace the duct paths. Sometimes where the ducts connect to the heater box, the connections dislodge, or the same could happen near the registers. Inspect the ducting for tears and kinks. In my case, I had to switch the ducts around to get flow to the right place. Way too much was going to the basement and we got too little heat where we needed it.