We have an '08 Cougar so the manual operation might be a bit different. On ours, there is a small access "door" found on the underbelly of the unit. It is located about 1 ft ahead of the front passenger-side tire and approximately 2 ft from the side. The "door" is a cut-out flap in the plastic coroplast held in place by a plastic tie.
If you open the flap, you will see the end of the drive mechanism and the motor. There is a 3/4 inch nut at the end which, when turned with a ratchet, will move the slide in or out. As a caution, you will need to disconnect the wires to the motor when manually operating the slide. If you don't, you may cause damage to the motor.
I have only the one slide (kitchen table/chairs & LR couch).
As I said, your set-up may be different and hopefully someone with the identical model will chime in with more accurate information.
__________________
2008 Cougar 5th Wheel 27RKS
2005 2500 GMC Duramax
|