This is what I do:
Sanitize: 1/4 cup Clorox per 15 gallons. (Not the color smart) Therefore use almost 3/4 cup for complete 43 g system. Set for At least 4 hours,
drain flush, refill.
Purify: 1 tsp per 10 gallons. Use almost 4.5 tsp Clorox for 43g.
I always rinse the FW tank, the lines, and the hotwater tank before and after sanitizing. I know that many do not like clorox in the water heater tank, but I Do not have an anode type and have never had any problems doing that. If you ever had stinky water from the hot tank you would understand! Once sanitized, I usually don’t “purify” if I use the water in the fresh tank straight away after the rinse.
I use well water, so I purify with clorox thereafter.
__________________
Skids
2019 Bullet 248RKS
|