|
01-20-2015, 05:49 AM
|
#1
|
Junior Member
Join Date: Dec 2014
Location: Tampa Bay
Posts: 6
|
WDH for short drive?
First trip out this weekend and I'm going to pick up our trailer (Passport GT 2250RB) from the self storage lot on Thursday night to pack up for the weekend. The lot is only 4 miles from the house.
Do I need to connect the anti-sway bars from my Blue Ox Swaypro or can I just hook up to the trailer to haul it home and drop it in the driveway?
|
|
|
01-20-2015, 05:58 AM
|
#2
|
Senior Member
Join Date: Oct 2014
Location: Germantown, TN
Posts: 6,331
|
Correct me if I'm wrong, but connecting the bars would take, uh, maybe two minutes? Or is a blue ox hitch something different? I'd hook them up.
__________________
Jim in Memphis, Wife of 51 years is Brenda
2019 F450 6.7 Powerstroke
2018 Mobile Suites 40RSSA
2021 40' Jayco Eagle
2001 Road king w/matching Harley sidecar
2021 Yamaha X2 Wolverine 1000
|
|
|
01-20-2015, 06:02 AM
|
#3
|
Senior Member
Join Date: Apr 2014
Location: Berkley
Posts: 751
|
I'm not sure how the blue ox swaypro works, but if it has the typical weight distributing bars, I would probably attach them. Their purpose is to make sure the load is even distributed on both your axles. To run without them, might cause more wear and tear on your vehicle, and would definitely make it handle worse, possibly on the dangerous side of things.
We too have a storage lot about 4 miles away, the roads to/from are 50 mph speed limit, with a couple small hills. I always hook everything up, just like going on a long trip. Though I will say the power jack makes this much easier.
If I am at a campground and I have to take the trailer to the dump station or something but we aren't leaving, I typically don't worry about it then. But the difference is a trip that is 1/4 mile or less and at 5 mph.
I also wanted to add that doing it gets you used it, and after awhile it helps you to be able to do it quickly and to remember exactly what your doing. Practice makes perfect. I know in the beginning it seemed like a daunting task, but now no big deal.
__________________
2022 Ford F150 3.5 Ecoboost SCrew 4x4 MaxTow
2020 Salem Hemisphere Hyper-Lyte 25RBHL
|
|
|
01-20-2015, 06:32 AM
|
#4
|
Senior Member
Join Date: Jun 2014
Location: Saint Louis
Posts: 235
|
I think it depends on too many factors to give a solid answer. The weight of the RV, tongue weight, length, TV, weather, and road type are all variables. If your have a 3/4 ton TV with a long wheelbase towing a 25' RV, probably not. If you are towing a 30' RV with 1/2 ton, probably. Higher speeds, wind, and hills make sway more prevalent.
Take it with you, and pull over to install it if needed. I think you will find it unnecessary.
__________________
2012 Ford Expedition EL Limited
2014 Passport 2510RB
|
|
|
01-20-2015, 06:50 AM
|
#5
|
Senior Member
Join Date: Feb 2013
Location: MA
Posts: 3,153
|
Only you can make the call, as others have said. How much weight comes off the front wheels, what speed are you driving, highways or neighborhoods. If something happens you will be wishing you spent a couple minutes hooking everything up.
__________________
2013 Premier 31BHPR
2014 F350 6.2L
Soon to be just DW and I
|
|
|
01-20-2015, 06:56 AM
|
#6
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
Quote:
Originally Posted by jkohler70
I think it depends on too many factors to give a solid answer. The weight of the RV, tongue weight, length, TV, weather, and road type are all variables. If your have a 3/4 ton TV with a long wheelbase towing a 25' RV, probably not. If you are towing a 30' RV with 1/2 ton, probably. Higher speeds, wind, and hills make sway more prevalent.
Take it with you, and pull over to install it if needed. I think you will find it unnecessary.
|
I agree, you may not "find it necessary" but..... The purpose of a WDH is to transfer weight back to the front tires. That means it puts the weight back on the steering axle. When you add significant weight on the rear bumper, you "unload" the steering axle. That means that if you happen to crest a hill, or as in many southern towns, go through an intersection with the "dips for drainage", you could find yourself with the steering axle "off the ground" when you really need to be avoiding a kid on a bicycle or a car that ran the yellow light.
If your tow vehicle is big enough and your tongue weight is light enough not to unload the steering axle, you probably don't need it, but as notanlines said, "but connecting the bars would take, uh, maybe two minutes?" Why risk the potential to get into an accident for something so simple.
Besides, if you're "dragging it home to pack for a trip" you're going to need them anyway.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
01-20-2015, 08:21 AM
|
#7
|
Senior Member
Join Date: Feb 2013
Location: Erie, PA
Posts: 441
|
First let me say I'm not trying to be a smartass. My question is will you be wearing your seatbelt for this 4 mile trip? My answer would be yes because it is a safety device and we never know when we need them. As for the WDH, it is a safety device and likewise should be used any time we are on the road, no matter how short the trip. Whatever you decide, just be safe!
__________________
2007 Silverado 2500HD 4X4
2013 Springdale 303BHSSR
|
|
|
01-20-2015, 09:06 AM
|
#8
|
Senior Member
Join Date: Jan 2013
Location: Saint Charles, Misssoui
Posts: 163
|
I am appx. ten miles away from home to storage lot.. My speed doesn't go above 40 MPH, w/ no highway. If I am just taking the camper back to the house.. I don't usually hook up my WDH.. nor sway bar.. My choice.
__________________
Craig
Kathie
2013 Keystone Cougar
X-Lite 31 RKS
|
|
|
01-20-2015, 10:45 AM
|
#9
|
Senior Member
Join Date: Nov 2012
Location: Fruitland
Posts: 3,357
|
I agree with post #7. But, we do not know what truck you have. I have a truck that weights more than the trailer and almost as long. I drove it around with anti sway and WHD not hooked up in town just to see if stopping or steering etc changed. On mine it did not. All other tows I hook up all that safety stuff, why? because it is safety stuff.
__________________
2013 24RKSWE (27ft TT) Cougar 1/2 ton series SOLD 10-2021
2013 Ford F350 4x4 CC 6.7 engine, 8 ft bed, 3.55 rear end, lariat package
Retired from Oregon State Police in 2011 than worked another 9.5 years as a small town traffic cop:
As of 05-2020, I am all done with 39 years total police work. No more uniforms for me.
|
|
|
01-20-2015, 03:08 PM
|
#10
|
Senior Member
Join Date: Nov 2014
Location: Spring Lake, NC
Posts: 181
|
'pends on the trailer and truck. In my case if it is the DRW F350, it weighs more than all of my current TT's, when towing with it I only use sway control. If using the F150 (which also works with all current TT's) everything gets hooked up before I leave my property. All it takes is one bad accident, your fault or not for a lawyer to hit you with contributory negligence, I have actually had this happen. Fortunately my lawyer was better than their lawyer and the charges were dropped. However I still had to pay for my lawyer.
Your call...
Aaron
|
|
|
01-21-2015, 06:23 AM
|
#11
|
Junior Member
Join Date: Dec 2014
Location: Tampa Bay
Posts: 6
|
Thanks for all the feedback and quick replies! I'll plan to hook them up. I'll give me practice and is a good safety feature.
|
|
|
01-22-2015, 11:20 AM
|
#12
|
Senior Member
Join Date: Oct 2010
Location: Okanagan, BC
Posts: 916
|
Only time I don't is when I pull my trailer out of it's spot, drive around the block and park it with the door facing the house. But I can't get my trailer out of it's spot with the bars hooked up without dragging the rear of the trailer.
I'd hook up.
__________________
2010 Cougar 30RKS
2015 GMC Sierra Max Trailer
"Drinks for 6, Dinner for 4, Sleeps 2"
|
|
|
01-23-2015, 09:39 AM
|
#13
|
Senior Member
Join Date: Aug 2009
Location: IL
Posts: 352
|
I have a 3500 diesel pulling a 30'-8500# camper, may be overkill but I had the truck first and not wanting a 5ver. The weak link is the truck hitch. My factory hitch is only rated for 500# or 1200# tongue weight with a WDH. So bars are needed even on the short runs.
__________________
2010 Kestone Laredo 291TG
2006 Dodge Megacab CTD
|
|
|
01-24-2015, 10:19 AM
|
#14
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,690
|
DougM55 - Sounds like you made a good decision. Connecting and removing the hitch is always good practice. Knowing that you have all the safety issues covered is peace of mind. Knowing that your front tires will steer is really good to know .
Once upon a time (40+ years ago) I went to cut firewood in the southern NM mountains. I pulled a 16' sided trailer with a 1/4 ton Ford Ranger up there (back in the days of "it'll pull it, it's OK). Cut the wood and loaded it up. On the way down the mountain I knew the front felt light but continued on (chalk that up to complete stupidity ). The drop offs on this stretch of road are hundreds of feet and no rails back then. As I approached a bend in the road I hit a dip. I had never felt it before, and never have since, but, when your front tires actually leave the road when you need to turn...with a curve in front of you, a drop off of several hundred feet on the side and you are just sawing your wheels in the air.......well, your bodily functions can very well operate on their own if you get my drift . Thankfully, the nose was trying to come down and I hit the brakes which brought it down enough to turn a bit and get it stopped. I then spent a couple of minutes sorting myself out before re-distributing the load of wood.
All to say, I would just put the hitch on too.
|
|
|
01-26-2015, 10:21 AM
|
#15
|
Junior Member
Join Date: Dec 2014
Location: Tampa Bay
Posts: 6
|
Back from the trip. Everything went well. I ended up hooking up the anti-sway bars to the Blue Ox even from the self storage lot. Piece of cake. Glad I got the electric jack!
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|