How do You Convert the Dinette into a Bed?

[meyerske]

The dinette in our Cougar 294RLS supposedly converts to a bed. Can someone explain how, please? The table looks like it is secured with screws?

[rode2nowhere]

table pulls off and so do poles, like most I guess. Then table top goes where seats are and cover with cushions. Not comfy

[BulletOwner1]

Don't know how your dinette is set up. One type has large diameter pole (or two) that you pull the table off the poles, remove poles and the table top rests on the bench seats. Usually on two support strips of wood between benches. The other type has a folding leg and is attached to the wall. Fold the leg and the table should lift out of brackets on the wall. Then set table top down between the benches.

[meyerske]

Here's a pic.

[buzzcop63]

Same table I have and the above descriptions are correct.

[BulletOwner1]

Just grab the table and start wiggling back and forth while lifting up. The poles will separate from the mounts both top and bottom.