mguay - Can't thank you enough for taking the time to post the photos.
I didn't dare try and travel with mine bent like that. To big a risk and not worth it.
I found a metal fabrication shop about 5 miles form the camp ground and limped it over there. I told him I wanted the spring hanger welds checked over and that I wanted the hangers reinforce to prevent them from rolling over again.
Ironically your 1 1/4" cross brace looks very similar to the "Cross Member" suspension improvement. I think theirs attaches to the bottom of the frame rails but whatever, similar idea. I'm going to have them weld a piece of channel between the suspension hangers too.
http://www.rvplus.com/mor-ryde-cross...FSdk7AodyVQA8w
As an FYI > > > I've been told the trick to getting a bottle jack to work horizontally was to put the pump side down. As long as the pump is still in (or getting) oil it will still work.
When I get mine back I'll post some photos. The guys are the shop said they see this kind of thing a lot.
I can't thank everyone who responded enough for all the help. I learned a lot from your posts and this really helped me. Thanks!