|
07-07-2012, 01:51 PM
|
#1
|
Junior Member
Join Date: Jul 2012
Location: Sacramento
Posts: 3
|
Superglide needeed or not?
Getting ready to but a Sydney 328FRK. Not sure if I need a SuperGlide hitch or not with the new front cap.
I have an 05 2500hd crew cab silverado short bed.
Any info will help as I'm looking at hitchs.
Thanks
|
|
|
07-07-2012, 03:38 PM
|
#2
|
Member
Join Date: May 2012
Location: Spring Hill, Florida
Posts: 56
|
There are other options for short bed trucks besides the Super Glide. All have pros and cons, including the Super Glide. So, I suggest you listen to what others have to say about each before you spend that kind of $$.
My previous rig was a short bed and I had a Reese Revolution Sidewinder, so I'll share what I know about that. The Sidewinder is not a 5th wheel hitch. It is a pin box that moves the pivot point of the pin box back to where the pin box is attached to the trailer (You Tube has some videos that will explain it better). By moving the pivot point you can literally make a 90 degree turn without hitting your cab. Sounds great, but there is a down side. Hooking up can be a problem at times because your truck has to be perfectly lined up with the pin box to get hooked up. Once you get the hang of it, it's not too bad but it can be an issue at times.
|
|
|
07-09-2012, 05:14 PM
|
#3
|
Member
Join Date: May 2012
Location: Kingston WA
Posts: 93
|
geb3.
I have a SuperGlide and I'm very happy with it - I never even think about the front cap hitting the truck. It does make some noises that can be disconcerting at first, though and it will slide and bang around when you're not towing so I bungie it down. I have a good friend who tows a 29' HItchhiker with an '05 Chevy crew cab short bed. He has a Reese manual sliding hitch - you have to get out and release it before backing and he says he has never released it and never had his front cap contact the cab. So, I suppose if you're feeling real lucky you could try a stationary hitch, but I wouldn't.
Happy trails,
__________________
Bill Stuart
2012 Alpine 3555RL
2015 RAM 3500 Laramie Limited Mega Cab Dually 4X4 Cummins, Aisin trans, 4.10 gears
Andersen Ultimate 5th Wheel Connection
Previous RV's:
1992 Prowler 35' Bunkhouse
1986 Fireball 30'
1978 Nomad 24'
1963 Kenskill 19.5'
1972 Dyna Cruiser Camper on '72 F-250
A Tent
|
|
|
07-09-2012, 07:11 PM
|
#4
|
Senior Member
Join Date: Aug 2010
Location: Dacula, GA
Posts: 620
|
Geb3 Outback
I have the 2011 329FBH Sydney and have towed it across the US and back and many other trips as well (We are retired and live just north of Atlanta). I have been in all types of situations and had to jacknife the rig at one situation, which, BTW, I do not recommend. We tow with a short bed Dodge 2500 crew cab, 6.7 turbo diesel. With the new style RV front caps, we cannot hit, comes close, but will not hit. Now I am not saying it's not possible, but HIGHLY improbable. I have a Curt hitch with manual maneuver position. I HAVE NEVER USED THAT POSITION. NEVER NEEDED TO. I have pulled this 36 ft er through many small towns in the USA, tight truck stops, unlevel, forsaken supposed to be campgrounds, etc ... up mountains, down mountains, lost in the mountains (only kidding) never, ever needed any type of slider. In fact, with the slider back, you have to allow for a wider turning radius to accomodate for the extra 2 feet.
No, I did not scrimp on cost because a slider costs more. After researching blogs, forums, etc, I came to what made me happy. My TV costs more than my RV so I certainly would have gone for another $500 if I thought I needed it. Always remember, regardless of choice, set your mirrors so YOU can see where they will clear. ESPECIALLY in those RV fuel lanes at truck centers.
Good luck on your decision and travels.
|
|
|
07-10-2012, 12:04 PM
|
#5
|
Junior Member
Join Date: Jun 2012
Location: Northern Colorado
Posts: 7
|
We just went through this same learning process. Upgraded from our 18' travel trailer to a 2013 Copper Canyon 252FWRLS just last month. When researching our new camper and talking with the dealer, they informed me I would 'have to' get a superglide as my TV (2005 F250 Quad cab) only had the 6.5' bed. Looked like a nice setup, but it was going to be $1500 more (including install) than a manual slider. Dealer also implied that there were 'lots of horror' stories for people that didn't get the auto slider so I was concerned.
As others have mentioned, since our new 5er had a radiused cap, I was wondering just how much that would help with the turn and whether the superglide would really be necessary.
Long story short, I went with the Reese manual slider which tweety's just happend to have on sale with rail kit for under $500 & free shipping. After PDI we were able to do practice turns fwd/back right at the dealers back lot. The results were as follows:
For our specific rig setup, in the 'tow' (forward) position, it turns out that going forward, I can do a full-lock turn of over 270degrees w/o the cap approaching 'nervous' distance (ie: < 6") to the cab. Backing from straight to full-lock turn in the towing position, I can cut to an angle of about 85 degrees before getting close.
Experimented also with the 'manuvering' (rear) position just to see. Obviously a bit more angle availble with that but noticed that the tires and axles on the trailer really don't like being at those steep angles on pavement!
Took it out on the initial shakedown trip that next week and all went fine. Got in and out of fueling stations and campgrounds w/o having to move the slide hitch at all. I'm sure it'd be more of a benefit with other rigs and setups, but for us, I'm glad to put that extra $1500 into other things.
Cheers!
Steve W>
|
|
|
07-10-2012, 12:45 PM
|
#7
|
Member
Join Date: Jun 2012
Location: Wisconsin
Posts: 43
|
Same story. I have a manual (Husky EZ Roller) sliding hitch that I've used while 5th-wheel camping for over 3 years now. We camp nearly every weekend in the summer to various campgrounds. Never, never.... ever have I needed to stop and used the slider feature to make a tight turn forward or reverse. I like that it's there in case I need it, but doubt I ever will. TV was a 2005 short box F250, now is a 2011 short box Chev 3500.
__________________
2012 Keystone Montana 3582RL
2011 Duramax 3500 short box
|
|
|
07-13-2012, 09:43 AM
|
#8
|
Member
Join Date: Feb 2012
Location: California
Posts: 30
|
Quote:
Originally Posted by billstuart
geb3.
I have a SuperGlide and I'm very happy with it - I never even think about the front cap hitting the truck. It does make some noises that can be disconcerting at first, though and it will slide and bang around when you're not towing so I bungie it down.
Happy trails,
|
I know what you mean about the banging around when not towing. I put a piece of heavy duty round cardboard tube that I wrapped with HiGHVIS tape in between the way tubes. No more banging.
I love my SuperGlide. I went with the 18K. I have a 2012 3500RE.
|
|
|
07-13-2012, 01:04 PM
|
#9
|
Member
Join Date: Feb 2012
Location: kansas
Posts: 44
|
slider hitch
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|