game warden, Howdy;
I'll dig out my licenses shortly...
You might have to do as I did with mine. The wall plate with the amp connection, take it loose from the wall, and check to see if ALL the connections are good and snud (7/16ths. wrench works well). Then go to each seperate wall connection and repete. Check the connections on the antenna as well. I scraped off the sealent and found the connection that lives inside the roof was loose too. Reckon the "worker" that hooked it up gave each connection a few quick twists and then buttoned it up...
Also be sure that the green light (amp. ON), is lit.
hankaye
PS.
http://www.winegard.com/kbase/kb_search2.php
Here's a page to help some more ie. which cable goes where in case it's wired wrong...
__________________
Striving for a less complicated life since 1949 ...
Home: 2008 Cougar 278 RKS
T.V.: 2004 F-250 4X4, Level III BulletProofed , Detroit Tru-Track Differential (915A550)
Dog: 2006 Border Collie (Rascal) aka Maximum fur dispersal unit. (08/04/2006 - 12/16/2017) RIP.