Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 

Go Back   Keystone RV Forums > Keystone Tech Forums > Repairs & Maintenance
Click Here to Login

Reply
 
Thread Tools Display Modes
 
Old 11-07-2019, 03:59 AM   #1
notanlines
Senior Member
 
notanlines's Avatar
 
Join Date: Oct 2014
Location: Germantown, TN
Posts: 6,309
Anode rod, aluminum or magnesium

It is that time (maybe a little past time) to replace the rod. I have just used magnesium in the past because that's what was available. Anybody have an opinion on what might be better?
__________________
Jim in Memphis, Wife of 51 years is Brenda
2019 F450 6.7 Powerstroke
2018 Mobile Suites 40RSSA
2021 40' Jayco Eagle
2001 Road king w/matching Harley sidecar
2021 Yamaha X2 Wolverine 1000
notanlines is offline   Reply With Quote
Old 11-07-2019, 04:09 AM   #2
Stumpy75
Member
 
Join Date: Mar 2014
Location: Toledo, OH
Posts: 85
The magnesium work better for protecting your hot water tank. They react faster to an aggressive water(sacrifice more). The aluminum rods react slower, and are used where there is very aggressive water that would cause the magnesium rods to disintegrate too fast(like less than a year).

I've always used the magnesium rods. Some years, they are more eaten than others, depending on the quality of the water where I was that year.
__________________
Chris

2014 Keystone Outback 210TRS
2020 F150, 3.5l, 4x4, 3.55:1, Supercrew
Stumpy75 is offline   Reply With Quote
Old 11-07-2019, 04:30 AM   #3
tech740
Senior Member
 
tech740's Avatar
 
Join Date: Jul 2014
Location: Hemlock
Posts: 816
I use the mag rods. I figure I would rather replace the rod more often than the water heater. Just my thought.
__________________
R.J. and Ginger

2019 Ram 3500 6.7 HO, Aisin Trans 3:73
Reese Goosebox
2019 Sandpiper 379FLOK
tech740 is offline   Reply With Quote
Old 11-07-2019, 05:55 AM   #4
ChuckS
Senior Member
 
ChuckS's Avatar
 
Join Date: Mar 2014
Location: Mountain Home, Idaho
Posts: 2,978
I’ve always stayed with magnesium anodes... not a full timer so it’s in my routine to remove anode rod after every trip to drain water, flush tank and reinstall same anode.. I replace once a year.
__________________


2007 GMC Classic club cab 4x4 Duramax LBZ
2014 Alpine 3010 RE. 34 foot fifth wheel
ChuckS is offline   Reply With Quote
Old 11-07-2019, 05:59 AM   #5
rhagfo
Senior Member
 
rhagfo's Avatar
 
Join Date: Apr 2012
Location: Portland, OR
Posts: 4,181
If you go places and get smelly hot water get an aluminum rod.
__________________
Russ & Paula and Belle the Beagle.
2016 Ram Laramie 3500 DRW 14,000# GVWR (New TV)
2005 Copper Canyon 293 FWSLS 32’ GVWR 12,360
Visit and enjoy Oregon State Parks
rhagfo is offline   Reply With Quote
Old 11-07-2019, 07:17 AM   #6
roadglide
Senior Member
 
roadglide's Avatar
 
Join Date: Apr 2015
Location: nm
Posts: 1,833
I have been using one aluminum rod 3 years after every trip I drain hot water heater then useing wire wheel brush buff off the caked pitted rod and threads add Teflon tape with small amount of anti seize . The rod gets stored away in the shop ready for the next trip.
__________________
2018 1 ton 4x4 c.c standard bed GMC Denali
Anderson ultimate hitch
2015 311 Impact Fusion toy hauler
2018 Milwaukee 8 FLRTU roadglide glide ultra
2018 800 Z force spot BUGGY.
500 watts of solar enough power for boon docking.
roadglide is offline   Reply With Quote
Old 11-07-2019, 07:55 AM   #7
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
I have always used magnesium. For my money it's a small investment to keep the tank from rotting out. In my opinion, if the magnesium rod is disintegrating too rapidly then the fix is not to move to a metal that deteriorates slower (i.e. it's not protecting as well) but the needed treatment may be with a better filter and if the water is REALLY bad a water softener leading into the camper.

To my way of thinking it's only logical that if the water is so corrosive that it's eating up an sacrificial metal the LAST thing I want to do is place a metal in the tank that makes that more difficult. The whole idea of the "sacrificial" poart is that it sacrifices itself to save the other metals, not for you to "save" the anode rod.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is offline   Reply With Quote
Old 11-07-2019, 08:09 AM   #8
JRTJH
Site Team
 
JRTJH's Avatar
 
Join Date: Mar 2011
Location: Gaylord
Posts: 26,858
This response is from a plumbing site that seems to address which anode to use with a better response than most:

Water Heater Anode Rod Aluminum vs Magnesium – Which is better?

Note: We do not compare zinc anode rods here as they are actually just aluminum rods with a small portion of zinc. A zinc anode rod however is useful for combating rotten egg smell (sulfur) that may come from the water. If you experience a rotten egg smell then an upgrade to a zinc anode rod may be a good idea.

choosing the right anode rod mainly comes down to the level of hardness in your water. For harder water an aluminum anode rod is the best choice for your heater and if you live in an area with soft water then a magnesium anode rod is your best choice. Aluminum anodes tend to be cheaper than magnesium anode rods. A magnesium rod will generally last less than an aluminum rod.

One issue with aluminium rods is that the corrosive material that is formed on the anode tends to harden and sink to the bottom of the water tank. This can potentially find its way into your taps and cause issues down the line.

Our overall decision in the water heater anode rod aluminum vs magnesium argument is that magnesium anode rods are the better choice when deciding which anode to buy for your water heater.
__________________
John



2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
JRTJH is offline   Reply With Quote
Old 11-07-2019, 02:19 PM   #9
notanlines
Senior Member
 
notanlines's Avatar
 
Join Date: Oct 2014
Location: Germantown, TN
Posts: 6,309
Thanks for all the answers. DW and I made a trek to all four RV outlets in the west Tennessee area. Nothing but aluminum. Why is it that at 71 years old I find it so hard to just resort to 'one touch purchase' on Amazon, two for $21.00, including freight? They'll be here on Tuesday.
__________________
Jim in Memphis, Wife of 51 years is Brenda
2019 F450 6.7 Powerstroke
2018 Mobile Suites 40RSSA
2021 40' Jayco Eagle
2001 Road king w/matching Harley sidecar
2021 Yamaha X2 Wolverine 1000
notanlines is offline   Reply With Quote
Old 11-07-2019, 02:36 PM   #10
flybouy
Site Team
 
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,714
Quote:
Originally Posted by notanlines View Post
Thanks for all the answers. DW and I made a trek to all four RV outlets in the west Tennessee area. Nothing but aluminum. Why is it that at 71 years old I find it so hard to just resort to 'one touch purchase' on Amazon, two for $21.00, including freight? They'll be here on Tuesday.
Between shopping on Amazon, having Alexa turn lights on and off and show me who's at the door and elsewhere that I have cameras I think they know more about me than my Proctologist does.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
flybouy is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.


All times are GMT -8. The time now is 09:17 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.