SLIM
Yes, it is a propane fitting, its the new shiny one with a disposable glove finger cut off to protect it temporarily
. If you look close you can see the black valve handle on it. The handle operates a ball valve, and also locks the collar, preventing disconnection when in use. I bought it from camping world.
outwest:
Thanks for the link, I did it that way because I thought it would be easier and save time.
By the way, the full flow plugs do not always match ports. It seems there is a slight difference in manufacturing so I would buy these in a set for a perfect match, as they are commonly offered in a set.
For the BBQ you will have to remove the existing regulator on the BBQ, attach a hose (my propane hose slide right over the nipple on my BBQ) and add a:
http://www.homedepot.com/p/Watts-1-4...7#.UnWlquKv-8E
and a:
http://www.campingworld.com/shopping...low-plug/30332
on the other end of your hose. I used good hose clamps and covered with tape as it only see about 15 pounds.
This is the low pressure side after it comes through your RV's regulator (15ish#s) Here is some pics.