Grrrr....New MaxxFan Deluxe Install SNAFU
So yesterday I finished up my upgrade of my main living area vent to a MaxxFan Deluxe.
I spent too much time making sure I put down a perfect layer of Dicor self leveling lap sealant and it flowed out beautifully and looked similar to the factory job.
Finished up around 3pm. and the temp was about 65°F when I finished. Overnight the temp got down to around 45°F. Today around noon we got some pretty good rain.
I went up top to check out the sealant and found a huge mess! The sealant has become all lumpy and when I press the lumps, water comes out of the swells.
So now I have to scrape all of this off and try again.
Any advice other than to protect it from rain for much longer than the advertised 4hr to waterproof claims of the product?
__________________
2021 Keystone Cougar Half-Ton 32BHS 5th Wheel
2022 F-450SD, Lariat Ultimate, CC, 4WD, FX4, Rapid Red, Curt A16/R24 Slider
Upgraded: 2020 F-250SD, XLT Pre, CC, SWB, 4WD, FX4, HCTP, 6.7 PSD, 3.55 e-lock, Blue Jeans Metallic
|