Quote:
Originally Posted by chuckster57
Lots of things to consider BEFORE you take on this project:
Is the unit "gen prepped? IF NOT THEN:
what fuel are you going to user?
It is supposed to be in a "box" separated from the storage compartment and vented through the bottom
You will need a transfer switch, and are you going to use remote start?
I have put lots of gens in both units with and without prep. It can be done you just have to make sure you have all the components on hand.
|
First off I am not sure if it is Genset ready, I suspect that it is not, so I would have to acquire a Transfer switch, it is a gas system so I will have to set up a fuel containment system as well.
As for the remote start, that may have to wait for a little bit.
I am enlisting a good buddy who runs a Repair/Install shop, he has worked on these generators in the past so I feel relativley confidant that he can perform this for me.
__________________
2014 Dodge 3500 Laramie 6.7 Cummins, Exhaust Brake.
2013 Cougar High Country 315RES