Second opinions (or more)

[Pull Toy]

I will be disconnecting the negative battery cable, and coming off of shore power to swap out some older (rusty) 12 volt circuit breakers. Other than probably needing to reset the CO2 detector, do I need to reset anything else? Will the Lippert 6 point need to be reset for level?

Thanks in advance,

[Fishsizzle]

Originally Posted by Pull Toy

I will be disconnecting the negative battery cable, and coming off of shore power to swap out some older (rusty) 12 volt circuit breakers. Other than probably needing to reset the CO2 detector, do I need to reset anything else? Will the Lippert 6 point need to be reset for level?

Thanks in advance,

I wouldn’t think so. Just had all my batteries out and redid some wiring with more re wiring to come. Everything worked as it should with new batteries and wires in

[Pull Toy]

Worked like a charm!!!

Swapped out 30 amp breakers installed by Keystone for the 50's recommended by Lippert... Boy what a difference in performance! My slides, and 6 point hydraulics fly compared to the 30 amp breakers, that constantly clicked. (Silly me, I thought the click was faulty relays!) . This five year old camper now works as intended!

AS Fishsizzle mentioned all is well. the CO2 reset itself after about 5 seconds, and 6 point level up, and room slides worked perfectly without the old time hesitation.

Highly recommended upgrade!

[Customer1]

CO2 makes your soda fizzy, CO is the stuff that might kill you.

[chuckster57]

Originally Posted by Customer1

CO2 makes your soda fizzy,

And makes plants grow.

[Pull Toy]

OOPS! My bad, my mind was out to lunch.