|
|
08-13-2018, 02:22 PM
|
#1
|
Member
Join Date: Apr 2013
Location: Washington State
Posts: 39
|
Increasing weight carry ability
We hear all the numbers for our fifth wheels and travel trailers but which is the most important? If I were to change the axles on my 2008 Couger from 5200# to 80000#, have I safely increased my load capacity? Just an old sailer pondering things!
I don't really want to buy a whole new trailer so I can carry more "stuff".
ray
|
|
|
08-13-2018, 02:26 PM
|
#2
|
Senior Member
Join Date: Aug 2012
Location: Waco, Tx
Posts: 5,457
|
Short answer... NO
__________________
2015 Ford F350 DRW 6.7 Diesel XL
2020 Avalanche 313 RS
|
|
|
08-13-2018, 02:37 PM
|
#3
|
Member
Join Date: Apr 2013
Location: Washington State
Posts: 39
|
Thanks for the short answer but the question begs "why?".
|
|
|
08-13-2018, 02:45 PM
|
#4
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
A bit longer answer: The frame, tongue/pinbox mount are all the same and remain unchanged. There is more to GVW considerations than just axle rating. Even things like the welds that hold the frame crossmembers to the I-beam or C-beam rails are a part of the maximum GVW rating consideration.
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
08-13-2018, 04:09 PM
|
#5
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,751
|
Quote:
Originally Posted by rayjoanlough
We hear all the numbers for our fifth wheels and travel trailers but which is the most important? If I were to change the axles on my 2008 Couger from 5200# to 80000#, have I safely increased my load capacity? Just an old sailer pondering things!
I don't really want to buy a whole new trailer so I can carry more "stuff".
ray
|
The answer would be no but it would be interesting seeing those 80K axles under that Cougar!
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
08-14-2018, 01:07 PM
|
#6
|
Member
Join Date: Apr 2013
Location: Washington State
Posts: 39
|
OOPS my fat fingers pushed the 0 button one too many times! Maybe that's why John said the welds wouldn't hold up.
ray
|
|
|
08-14-2018, 03:07 PM
|
#7
|
Site Team
Join Date: Oct 2011
Location: Joppa, MD
Posts: 11,751
|
Quote:
Originally Posted by rayjoanlough
OOPS my fat fingers pushed the 0 button one too many times! Maybe that's why John said the welds wouldn't hold up.
ray
|
I think John read it and responded as 8K. Increasing the axle capacity is like changing your shoes to boots and thinking you can carry twice as much, your back will tell you no.
__________________
Marshall
2012 Laredo 303 TG
2010 F250 LT Super Cab, long bed, 4X4, 6.4 Turbo Diesel
|
|
|
08-14-2018, 03:12 PM
|
#8
|
Senior Member
Join Date: Mar 2017
Location: Auburn
Posts: 319
|
Quote:
Originally Posted by JRTJH
A bit longer answer: The frame, tongue/pinbox mount are all the same and remain unchanged. There is more to GVW considerations than just axle rating. Even things like the welds that hold the frame crossmembers to the I-beam or C-beam rails are a part of the maximum GVW rating consideration.
|
I think a good example that shows the differences are considerable is to compare two otherwise similar trailers (in terms of length, floor plan, features, etc.), but with one of them being a toy hauler and the other not. The toy hauler will be considerably heavier, both dry weight and GVWR, primarily because the toy hauler has to be built much stronger to handle the potentially much higher cargo weight.
__________________
2002 Ford F350 7.3 Super Duty XLT 4x4 CC LB SRW -- Pullrite Super 5th 16K
2017 Keystone Carbon 337
2022 Honda CRF-450R
|
|
|
08-14-2018, 05:47 PM
|
#9
|
Senior Member
Join Date: Nov 2017
Location: Mico, TX
Posts: 7,462
|
8K axles need different springs. Different tires and probably different rims. Most of the trailers out there have suspensions and tires just adequate for the amount of cargo anticipated. I think it would like be OK to bump up the carrying capacity a bit; say one step up on the axle (not 5200 to 8K lbs) if you upgraded the springs, wheels and tires. Getting pretty expensive I think as those axles are not cheap.
__________________
wiredgeorge Mico TX
2006 F350 CC 4WD 6.0L
2002 Keystone Cougar 278
2006 GL1800 Roadsmith Trike
|
|
|
08-14-2018, 11:23 PM
|
#10
|
Senior Member
Join Date: Feb 2010
Location: Taylors, SC
Posts: 3,031
|
Only the vehicle manufacturer or a certified modifier/alterer have the authority to change the vehicle's certified GVWR or GAWR (s).
For verification you can put - CFR 49 part 567 - into your computer's search engine and read the sections about modifications.
|
|
|
08-15-2018, 01:01 AM
|
#11
|
Site Team | Emeritus
Join Date: Dec 2015
Location: Kansas City
Posts: 3,878
|
In other words, you cant make a doberman out of a chiuahahu. You cant make make a silk purse from a sow's ear. You cant make a Porsche from Yugo. It'll still be a chihuahua, a sow's ear and a Yugo.
But with really big axles!
__________________
Chip Bruce, RPh
Kansas City, MO
2016 Impact 312
2017 Silverado 3500HD SRW
|
|
|
08-15-2018, 03:52 AM
|
#12
|
Senior Member
Join Date: Oct 2010
Posts: 117
|
And my question is....why the heck would you go up to a 8K axle anyway? They are using 8K axles on HUGE trailers. what the heck are you putting in your trailer anyway?????
If you do anything go to the IS system with disc brakes for about $7K.
|
|
|
08-15-2018, 05:18 AM
|
#13
|
Senior Member
Join Date: May 2015
Location: Near Saratoga Springs,
Posts: 1,131
|
While an axle change out to *K is a money waste, you can easily upgrade to 6K by changing springs as well as the outer hub bearings. Your tires will need to be capable as well. Unfortunately, this does not change the yellow sticker on the side nor will it change the axle part number which says "5200#". Oh and this is what I did plus added a 1" spring spacer to stop tire to body contact on our country's formerly 'shovel ready' to be rpaired highways
|
|
|
08-15-2018, 01:27 PM
|
#14
|
Senior Member
Join Date: Feb 2010
Location: Taylors, SC
Posts: 3,031
|
Quote:
Originally Posted by Dave W
While an axle change out to *K is a money waste, you can easily upgrade to 6K by changing springs as well as the outer hub bearings. Your tires will need to be capable as well. Tires are fitted to the vehicle certified GAWR and nothing else. Unfortunately, this does not change the yellow sticker on the side nor will it change the axle part number which says "5200#". The vehicle certified GAWRs must remain at 5200#. Any loading above those 52OO# ratings will overload the trailer's GVWR. Oh and this is what I did plus added a 1" spring spacer to stop tire to body contact on our country's formerly 'shovel ready' to be repaired highways
|
In orange above.
|
|
|
08-16-2018, 02:46 AM
|
#15
|
Senior Member
Join Date: May 2015
Location: Near Saratoga Springs,
Posts: 1,131
|
Quote:
Originally Posted by CWtheMan
In orange above.
|
Yes, that's what I said: "Unfortunately, this does not change the yellow sticker on the side......."
The 5200 pound tires will be sufficiant if the OP uses the supplied or similar tires. If he went to a 7-8000 axle, then he would need to change to a heavier weighted tire
|
|
|
08-16-2018, 08:48 AM
|
#16
|
Senior Member
Join Date: Feb 2010
Location: Taylors, SC
Posts: 3,031
|
Quote:
Originally Posted by Dave W
Yes, that's what I said: "Unfortunately, this does not change the yellow sticker on the side......."
The 5200 pound tires will be sufficiant if the OP uses the supplied or similar tires. If he went to a 7-8000 axle, then he would need to change to a heavier weighted tire
|
Tires are only required to be of a size and load capacity that equals the load capacity of the OE tires depicted on the certification label. Changing axles to a higher load capacity did nothing to increase the certified GAWRs. They remain at 5200#.
Remember, the ultimate limiting weight factor for your RV trailer is the certified GVWR.
|
|
|
08-16-2018, 09:24 AM
|
#17
|
Senior Member
Join Date: May 2015
Location: Near Saratoga Springs,
Posts: 1,131
|
Quote:
Originally Posted by CWtheMan
Tires are only required to be of a size and load capacity that equals the load capacity of the OE tires depicted on the certification label. Changing axles to a higher load capacity did nothing to increase the certified GAWRs. They remain at 5200#.
Remember, the ultimate limiting weight factor for your RV trailer is the certified GVWR.
|
You win as you have not a clue as to what I'm saying 5200 vs 6000 pound capacity. Or if you are who I think you are, I'll be beating my head against the wall
|
|
|
08-19-2018, 12:39 PM
|
#18
|
Senior Member
Join Date: Jul 2013
Location: Kansas
Posts: 308
|
Saw a Cougar 28SGS with the front half of the 5er bent upwards probably 5 inches. It was sitting in the repair bay of dealer and the repair guy opened the front basement and this guy had three top part of a rollaway toolbox and several wood boxes full of truck parts and it piled to the ceiling. He as a self-employed truck repair guy and somewhat of a pack rat. They put a tongue jack under the 5er pin and pin weight over 4,000 pounds of pin weight and advertised dry pin was in 1600 pound range. He was trying to claim warranty repair....
__________________
Current
2017 Fleetwood Discovery 40D Class A Diesel Pusher
Past
2016 GMC Denila 1 ton Diesel CC 3722
2017 Grand Design Solitude 310GK-R
Montana 3711FL Front Living Room 5er
|
|
|
08-19-2018, 01:53 PM
|
#19
|
Site Team
Join Date: Mar 2011
Location: Gaylord
Posts: 26,996
|
Quote:
Originally Posted by CWSWine
Saw a Cougar 28SGS with the front half of the 5er bent upwards probably 5 inches. ...They put a tongue jack under the 5er pin and pin weight over 4,000 pounds of pin weight and advertised dry pin was in 1600 pound range. He was trying to claim warranty repair....
|
And the argument was: Keystone is ignoring my warranty repair. They said I was overloaded, but I've seen fifth wheels with 4500 pound pin weight and they don't break, so it's crap rolling off the Keystone lines and they won't back their junk when it does break..... BTHT (been there, heard that).....
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|
|
|
08-19-2018, 02:35 PM
|
#20
|
Site Team
Join Date: Feb 2014
Location: W. Texas
Posts: 17,690
|
Quote:
Originally Posted by JRTJH
And the argument was: Keystone is ignoring my warranty repair. They said I was overloaded, but I've seen fifth wheels with 4500 pound pin weight and they don't break, so it's crap rolling off the Keystone lines and they won't back their junk when it does break..... BTHT (been there, heard that).....
|
I didn't know BTHT off the top of my head and thought you were improvising; "beer time, hear that?"
__________________
Danny and Susan, wife of 56 years
2019 Ram 3500 Laramie CC SWB SB 6.4 4x4 4.10
2020 Montana High Country 331RL
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|