Free 7 Day Trial RV GPS App RV Trip Planner Campground Reviews RV Maintenance Free 7 Day Trial ×

Go Back   Keystone RV Forums > Keystone Tech Forums > Keystone Questions
Click Here to Login

Thread Tools Display Modes
Old 06-10-2021, 07:41 AM   #1
Junior Member
Join Date: May 2014
Location: Kentucky
Posts: 4
Slide not working

Posting this for the benefit of others. We solved the issue pretty quickly, but it was not something I had seen before…

We arrived at the campsite after a 200 mile drive and started the setup routine. I had a kid putting out slides for me, and he found the kitchen slide wasn’t working.

I have had fuses blow in the past on this slide, so I carry spares. I confidently went to the fuse box in the underbelly and started pulling/checking the fuses. They were all good.

After some head scratching, I climbed up on the kitchen island to get access to the slide motor and started to unwrap the electrical tape around the wire nuts for the power supply. Jiggled things around a bit and had the wife try again. Solved!

Moral of the story: driving down the bumpy highway can cause things to loosen. This is a simple thing to look for before calling a mobile RV tech or waiting weeks to get your rig into the shop! And always carry spare fuses and electrical tape.
mrpinky is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Powered by vBadvanced CMPS v3.2.3

This website is not affiliated with or endorsed by the Keystone RV Company or any of its affiliates in any way. Keystone RV® is a registered trademark of the Keystone RV Company.

All times are GMT -8. The time now is 09:13 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.