|
04-22-2021, 01:57 PM
|
#1
|
Junior Member
Join Date: Apr 2021
Location: Pinson
Posts: 21
|
Convenience Center lights
2019 Springdale 1800BH
So this only thing that I have found not working is the lights for the freshwater and grey water levels. Has anyone had this issue? I have not found the pinout for the connections on the circuit board, all connections seem good and i have tested the continuity to the first crimp from the circuit board. just wondering if this is a board issue or a sensor in the tanks??
|
|
|
04-22-2021, 02:48 PM
|
#2
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,327
|
What do they read?
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
04-22-2021, 02:52 PM
|
#3
|
Junior Member
Join Date: Apr 2021
Location: Pinson
Posts: 21
|
The fresh and grey no lights only black works
|
|
|
04-22-2021, 03:31 PM
|
#4
|
Senior Member
Join Date: Feb 2021
Location: Des Moines
Posts: 149
|
Have you run enough water (gray) or “stuff” (black) to light up the 1/4 full lights?
__________________
2021 Keystone Montana High Country 383th
2021 Ram 3500 long bed
|
|
|
04-22-2021, 03:35 PM
|
#5
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,327
|
Quote:
Originally Posted by Trouble
The fresh and grey no lights only black works
|
Not even “empty”? Even if the sensors aren’t hooked up, when you press the button on the panel it would read empty.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
04-22-2021, 03:44 PM
|
#6
|
Junior Member
Join Date: Apr 2021
Location: Pinson
Posts: 21
|
I have filled the fresh water and and have ran water to put into the grey tank. Neither of these show any lights
|
|
|
04-22-2021, 03:50 PM
|
#7
|
Senior Member
Join Date: Feb 2021
Location: Des Moines
Posts: 149
|
Convenience Center lights
If the fresh water tank is full and no lights, then you have a problem. May not have enough in gray to turn on a light but fresh is.
Never had this so who can help troubleshooting?
__________________
2021 Keystone Montana High Country 383th
2021 Ram 3500 long bed
|
|
|
04-22-2021, 03:50 PM
|
#8
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,327
|
Ok. If your panel is KIB, you can get the color codes on their website. I would take the black tank lead and swap it with the fresh water lead. Then if the fresh light still doesn’t work it’s the board/light.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
04-23-2021, 01:20 PM
|
#9
|
Junior Member
Join Date: Apr 2021
Location: Pinson
Posts: 21
|
So a bit confused
I have disconnected the three wires which are for the grey fresh and black tanks and the black tank still lights up,
Next i have tried to look the part number for the board with no luck
I will attach pictures here
|
|
|
04-23-2021, 01:23 PM
|
#10
|
Site Team
Join Date: Jul 2014
Location: Modesto
Posts: 20,327
|
Does the black show empty? If so that’s good.
If you know a holding tank has liquid in it, hook that wire to the fresh and then see what it reads.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|
|
|
04-23-2021, 01:27 PM
|
#11
|
Junior Member
Join Date: Apr 2021
Location: Pinson
Posts: 21
|
Nope black still lights up, I moved the blue fresh water over to what was colored for blk water, but then I noticed with no wires connected it still has a light
|
|
|
04-26-2021, 02:10 PM
|
#12
|
Junior Member
Join Date: Apr 2021
Location: Pinson
Posts: 21
|
Convenience Center lights
I have another thread on this in the light trailers,
new to the forum so I thought I would drop this in here to look for an answer.
2019 Springdale 1800BH
So this only thing that I have found not working is the lights for the freshwater and grey water levels. Has anyone had this issue? I have not found the pinout for the connections on the circuit board, all connections seem good and i have tested the continuity to the first crimp from the circuit board. just wondering if this is a board issue or a sensor in the tanks??
|
|
|
04-27-2021, 04:07 AM
|
#13
|
Senior Member
Join Date: Mar 2015
Location: Southeastern Connectiut
Posts: 1,306
|
Welcome to the forum.
I wouldn’t get too excited about the tank level gauges. They are notoriously inaccurate, and useless in the real world.
With some time and experience you will be able to have a good idea of your status.
Good luck,
|
|
|
04-27-2021, 08:01 AM
|
#14
|
Senior Member
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
|
Quote:
Originally Posted by Trouble
I have another thread on this in the light trailers,
new to the forum so I thought I would drop this in here to look for an answer.
2019 Springdale 1800BH
So this only thing that I have found not working is the lights for the freshwater and grey water levels. Has anyone had this issue? I have not found the pinout for the connections on the circuit board, all connections seem good and i have tested the continuity to the first crimp from the circuit board. just wondering if this is a board issue or a sensor in the tanks??
|
If by chance you do get them to light up, that's about all it will tell you is that the lights are on.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
|
|
|
04-27-2021, 08:22 AM
|
#15
|
Senior Member
Join Date: Nov 2017
Location: Picacho, Az
Posts: 6,809
|
Quote:
Originally Posted by Trouble
I have another thread on this in the light trailers,
new to the forum so I thought I would drop this in here to look for an answer.
2019 Springdale 1800BH
So this only thing that I have found not working is the lights for the freshwater and grey water levels. Has anyone had this issue? I have not found the pinout for the connections on the circuit board, all connections seem good and i have tested the continuity to the first crimp from the circuit board. just wondering if this is a board issue or a sensor in the tanks??
|
If by chance you do get them to light up, that's about all it will tell you is that the lights are on.
__________________
Full-timed 10+ years
Sold '13 Redwood FB
Traded '13 GMC Denali DRW D/A
Replacement undetermined
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|