Sorry I didn't take pictures but the process is very straight forward, I used 2 16 inch by 25 foot and 1 24 inch by 10 foot rolls of R6 foil insulation from Home Depot, cut to width and stapled to the underside of the floor inside the pass thru, you will need foil tape to secure around the heating vent. As for the front compartment I used the 24 inch cut to width and you will be able to slide it forward over the 2 by 2 cross member and forward about 5 inches I did 2 layers in this area as it is open to the outside air also make sure that you insulate the are above the propane tanks. As for the bedroom you have to remove the mattress and the plywood, the area of the slide will have no insulation but you can insulate most of it but you need to trim in order to clear the slide out rails.
Hope that helps
__________________
2013 Cougar 331MKS
2007 GMC 3500 Sierra Duramax
RideRite air bags
Mor/Ryde XFactor and Wet Bolts
1982 BMW R100
|