|
|
04-13-2013, 08:13 AM
|
#21
|
Senior Member
Join Date: Nov 2012
Location: Virginia
Posts: 865
|
If the wood grain in your unit is such as mine, I would use mahogany plywood to best match the grain pattern.
Sent from my iPad using Tapatalk
|
|
|
04-13-2013, 08:24 AM
|
#22
|
Senior Member
Join Date: Sep 2011
Location: Northville NY in the Adirondacks
Posts: 2,128
|
Quote:
Originally Posted by byrdr1
Steve no carpet under tv cabinet? My Wife wants wooden steps stained with the cherry finish like on the cabinets. No sure what type of wood to buy for that. I've got a 10' piece of 1x12 pine in the building.
|
Randy,
The pine might stain up to match the cherry cabinets pretty well. But take a look at the grain of both. If the pine isn't close, check out some of the specialty plywoods at Home Depot or Lowes. They sell it in 2'x4' sections which should give you enough material with little wastage. And they have it in 3/4" thickness which should work well for the trailer steps. Birch in particular has a pretty neutral appearing grain that can be stained to match a wide variety of other woods.
The other thing you might look at is real stair treads They're 1 1/16" thick and come in a variety of sizes and woods. Home improvement centers carry them and you may find a real bargain on a clearance rack or a scratch, dent, and ding sale.
The same project is on my horizon this season. I'm leaning toward finished wood like you instead of carpeting. But I am concerned about the slippery factor. Any thoughts on that?
__________________
'11 Cougar 326MKS loaded with mods
'12 Ford F250 SuperCab 6.7 PowerStroke Diesel
Amateur Radio: KD2IAT (146.520) GMRS: WQPG808 (462.675 TPL 141.3)
|
|
|
04-13-2013, 08:39 AM
|
#23
|
Senior Member
Join Date: Nov 2012
Location: Virginia
Posts: 865
|
Steve,
A stair runner cut to fit would look nice. You would still be able to see the beauty of the finished wood on the edges, while protecting the tread and preventing an accidental slip. It could also add some contrast to the project.
Sent from my iPad using Tapatalk
|
|
|
04-14-2013, 05:55 AM
|
#24
|
Senior Member
Join Date: Jan 2012
Location: Central San Joaguin Valley, CA
Posts: 2,117
|
Steve,
FWIW - we used 3/4" oak sanded to 150 grit, stained with two applications of MinWax 'gunstock' then two coats of satin polyurethane sanded to 220 grit between coats. The steps are not slippery. Don't know how the finish will hold up, but, shouldn't be too hard to touch up the poly.
Jack
__________________
Jack & Marty
2018 Laredo 298 SRL
2011 F-250 SB Crew Cab 4x4 6.7L
|
|
|
04-15-2013, 04:45 AM
|
#25
|
Member
Join Date: Aug 2012
Location: PA
Posts: 30
|
Randy cherry matched my trim just need to experiment with stain to get a good match.
__________________
2011 COUGAR 327RES
2014 RAM 3500 DRW 4X4
2003 RAM 2500 4X4
|
|
|
04-20-2013, 07:08 AM
|
#26
|
Senior Member
Join Date: Sep 2009
Location: North Carolina
Posts: 1,037
|
ok I have attached the plywood(3/4) that I had at home. Wife still wants finished steps, oak is $49 a step tread. Pine is $11 a step tread. Then cut and finished with stain. I used this 3/4 plywood that had s a stained finish just so I can use the steps. I am still trying to convince her carpet of which I have one piece left over, we'll see!
Sent from my iPhone using Tapatalk
__________________
Randy "Camp On"
2011 Cougar 327RES
2014 Ford F-350, 6.7L 4X4, CC, SRW
|
|
|
04-20-2013, 03:42 PM
|
#27
|
Member
Join Date: Aug 2012
Location: PA
Posts: 30
|
Randy carpet is easy on the feet and if you have socks on wood is like ice even my wife agreed.
__________________
2011 COUGAR 327RES
2014 RAM 3500 DRW 4X4
2003 RAM 2500 4X4
|
|
|
05-07-2013, 12:09 PM
|
#28
|
Senior Member
Join Date: Sep 2009
Location: North Carolina
Posts: 1,037
|
Was on the main Keystone website. the 2013&1/2 327RES must be out and they made some changes. you can see them on the 360degree view on the main keystone website.
first is the new taller cabinet in front of the slide queen bed along with a new taller exit window closer to the front of the camper.
ALSO folks they added the second step up from the main floor by the door into bedroom/bathroom area. I have done this mod to mine along with several others. Nice but the pictures are hard to see what they did or how far it comes into the main floor by the door. The new cabinet looks nice as it is taller with more drawers and double doors. Changed the "J" couch too! more of an 90degree couch.
good figure, we make the mod and they change the design of the camper? you are
__________________
Randy "Camp On"
2011 Cougar 327RES
2014 Ford F-350, 6.7L 4X4, CC, SRW
|
|
|
05-09-2013, 05:36 PM
|
#29
|
Senior Member
Join Date: Apr 2013
Location: Arizona
Posts: 233
|
Gosh I love the look of great woodwork! Great job, very good looking, matches the wood color, and so much nicer than the stock step. I have a bad hip and will likely do this mod as soon as I find "our" 316RL. Thanks for posting!
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|