Quote:
Originally Posted by jsb5717
What's the particular issue you're seeing? The front bay is likely quite similar to ours. Since there is lack of substantial structure where you would mount the upper brackets I used 2 of the 2-hole plates...one inside, one outside...sandwiching the floor of the bay between them. It's worked well. If that's your issue that was my solution. I know others have added some sort of additional structure as well to help spread the load a bit.
|
That, and I also noticed there is a propane pipe crossing from one side to the other. At this point I don't know if there will be any interference with that or not. I'm going to have to make a closer, more thorough inspection before I go nuts with the drill.
Thanks for that idea. At this point there's no doubt I'm going to want to reinforce that spot.