View Single Post
Old 01-22-2021, 02:52 PM   #67
sportsman
Junior Member
 
Join Date: Dec 2020
Location: Ayr
Posts: 5
Quote:
Originally Posted by bobbecky View Post
On the Dexter 7,000 lb axle, the inner bearing will be 25580 with the race 25520. The outer bearing will be 14125A with the race 14276. You will use 10-36 seals for this axle. The bearing and race numbers are not Dexter numbers, but are industry standard numbers, so you can get any manufacturer's bearings with these numbers and they are the same. The seal number is the Dexter number K71-305-00, but the 10-36 will get you the correct number seal. If you go to page 80 of the manual, at this link, you will see the bearings, which they refer to as the cone, and the races are referred to as the cup. Page 78 has the seals, and the entire manual is an excellent thing to have, as it has everything you need to know about their axles, torques, and all maintenance. https://www.dexteraxle.com/docs/defa...sn=cfe1e328_42
Can you buy a bearing kit that gives you all these numbers, or is it better to buy individual parts?
sportsman is offline   Reply With Quote