|
I recently installed a MaxxAir Vent Cover and MaxxAir Fan on my Bullet TT. My suggestion is to go buy yourself a sheet of 2" polystyrene foam board (8×4ft). Use a jig saw or very sharp knife to cut it into four 2×4 sections. Use these to place around your work space on the roof, making sure the foam over laps at least 2 trusses. The foam is gentle enough for contact with the roof membrane while at the same time providing rigid support for your body weight.
__________________
2017 Keystone Bullet 308BHS in Saddle.
2017 RAM 2500 Laramie Mega Cab 4x4 Hemi 6.4L
2008 GMC Yukon XL Denali (SOLD)
Hensley SwiftArrow Control Hitch with 1000 lb Spring Bars
Me, DW, (3) little DS's, and 1 rambunctious Boston Terrier
|