Keystone RV Forums - View Single Post

**chuckster57** · 01-24-2017, 05:55 AM

If there is only the one "in" then that coax usually goes to the booster. There will be 2 coax lines (on the back side), one for the inside and one for the outside TV.

From your description, it sounds like the coax "in" from the exterior screws into a port next to the booster (the plate with the light). If that's the case then I would bet your ready. The coax should have printing on it identifying it as either RG6 or RG59. If there isn't enough slack at the TV end, then check the other end.

01-24-2017, 05:55 AM	#4
chuckster57 Site Team Join Date: Jul 2014 Location: Modesto Posts: 20,350	If there is only the one "in" then that coax usually goes to the booster. There will be 2 coax lines (on the back side), one for the inside and one for the outside TV. From your description, it sounds like the coax "in" from the exterior screws into a port next to the booster (the plate with the light). If that's the case then I would bet your ready. The coax should have printing on it identifying it as either RG6 or RG59. If there isn't enough slack at the TV end, then check the other end. __________________ 2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel. Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS. Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.