|
One thing you can do is go to an RV store and buy a awning rod (or take a piece of 1/2" PVC pipe and a couple of ZIP ties and make a pull/push rod) Then you can stand beside your slide, reach under it with the rod, slip the ZIP tie (or the ring on the end of the awning rod) over the valve handle and pull it to dump. Do the same to push it back in when finished.
It's not an "ideal situation" but it'll keep you out from under the slide for almost all "while you're set up" dumping of the kitchen tank.
Some people simply leave that valve open and put a CAMCO endcap valve on the main sewer outlet. Either way is a workaround that usually make things easier.
Good Luck
__________________
John
2015 F250 6.7l 4x4
2014 Cougar X Lite 27RKS
|