Quote:
Originally Posted by Tarfu
Just one switch marked Water Heater and an indicator light for on or off....right now the light is off and I have hot water and the propane is on...
|
Assuming you have a rocker-type HW interior propane switch ........... When you turn the switch ON, the rocker will glow (red) indicating that it has been turned ON and there is another smaller light in the center of the control that will also come on for a few seconds. When ignition has been completed, you will hear the furnace come on and the small red light will go out. This is a visual clue that the gas has ignited and flowing properly and the furnace is operating on propane.
If you want to use 110VAC, you will have to go outside and depress the small, black rocker switch in the lower left-hand corner of the exterior HW tank panel. The switch may or may not have a cotter pin through it to hold in position.
As stated earlier, you can heat your water with one or both sources - propane or electricity.