|
I have a 2011 Laredo 291TG, the slightly smaller cousin to the 303. I believe the battery and front cap are the same on both. I run the reese dual cam setup, which works very well btw. I installed the hitch myself, the problem I ran into was with the brackets for the cams, the snap up brackets fit with no problem. According to the directions you can swap the cam brackets from side to side to gain clearance, I did that but part of the bracket was still going to interfere with the battery. I modified the brackets instead of the battery mount. Only had to cut away a small part of the bracket which didn't affect the strength of the bracket at all. I also had to remove the serial number plate, it was in the way no matter how you mounted the cam brackets.
|