[B&T]

If you have the standard Winegard antenna on your camper the antenna head contains an amplifier which is powered by the switch on the wall near your TV set. This switch actually does two things. It turns power on and off to the amplifier in the Camper antenna head and it also switches the signal going to your TV set from either the Camper antenna or the Cable input. If your new outside antenna does not have an amplifier you may or may not see an improvement in reception even thought it is higher. I assume you will be connecting the New antenna to the cable input so to get that signal to your TV set press the switch on the wall so that the Led is off. Led on=Camper Antenna, Led off=Cable input.