View Single Post
Old 07-19-2018, 08:15 AM   #20
Jeepshots
Senior Member
 
Join Date: Mar 2017
Location: Central Arkansas
Posts: 235
I'm running a Ram 3500 6.4L Hemi, pulling a 24' Bullet. I made the same trip thru the western part of Arkansas in both modes as a comparison base, and I ran it both with and without the tow/haul mode activated. When doing so, I've pulled up the truck sensor summary page on the instrument display, showing water temp, oil temp, tranny temp and oil pressure. All the readings were the same, regardless if the T/H mode was activated or not. There were times i restricted the tranny gears to 4th or 5th, but the T/H mode didn't make a difference to the temps/pressure. Naturally, when activated, i'd have the different shift pattern and the higher engine revs. But that's it - basically, the truck didn't care that the camper was behind it. Oh, and no real appreciable difference in MPG. both runs were around 11 mpg.
__________________
- Doug
2017 Bullet 243BHS
2014 Ram 3500 Laramie Crew Cab w/6.4L Hemi
~ In your darkest hour when the demons come, call on me brother and we will fight them together! ~
Jeepshots is offline   Reply With Quote