Quote:
Originally Posted by notanlines
This might be a stretch, but if the inlet pipe is protruding deep at all from the top of the tank, every inch extra will mean a loss of about 3.5 gallons of water in a 18x46x8 tank. Just a thought. But I sincerely doubt 6 gallons of sludge in the bottom.
|
That thought crossed my mind. I think the only way I could possibly find that out is use a scope the tank with a camera.
I wish that had access covers on the top of these tanks but of course that would probably cause more issues of dealing with the tank cover and leaks.