Quote:
Originally Posted by JRTJH
If your pump is a FloJet pump with the blue "locking tabs", this is probably the "wisest investment you can make. Easy to install, reliable and stops all of the "plastic shavings" in one place before damaging the water pump diaphragm or clogging up the faucets.... https://www.amazon.com/Flojet-017403...6453363&sr=8-3
If your water pump has the screw on fittings, you can buy this one and cut the 1/2" FW supply line to the pump and install it "before the pump"
https://www.amazon.com/Flojet-017400...6453228&sr=8-4
There are alternative filters available. I'm not endorsing either of these products, but I have the "blue locking type" on my FW system. It's 6 years old and never a problem... |
I have the lower one and also 6 years. It has filtered out a dead pump and a dead water heater. Water heater left enough rusty crud to need the lines upbto the filter flushed but nothing got through to any faucets.