Quote:
Originally Posted by flybouy
Also, if you primarily using the fresh water tank I'd suggest using a filter to fill it and installing a screen on the pump.
|
If your pump is a FloJet pump with the blue "locking tabs", this is probably the "wisest investment you can make. Easy to install, reliable and stops all of the "plastic shavings" in one place before damaging the water pump diaphragm or clogging up the faucets....
https://www.amazon.com/Flojet-017403...6453363&sr=8-3
If your water pump has the screw on fittings, you can buy this one and cut the 1/2" FW supply line to the pump and install it "before the pump"
https://www.amazon.com/Flojet-017400...6453228&sr=8-4
There are alternative filters available. I'm not endorsing either of these products, but I have the "blue locking type" on my FW system. It's 6 years old and never a problem...