Keystone RV Forums - View Single Post

**chuckster57** · 05-25-2018, 11:48 AM

Welcome to the forum

If it’s a suburban brand the element is underneath the plastic oval cover, located near the bottom left corner.

If it’s an Atwood, the element is located on the back side of the unit. 1 1/2” socket is needed and it’s a tight fit. Best thing is to take the old one out and match the wattage that should be stamped on the part. Be sure it’s actually bad before spending all the time and effort.

05-25-2018, 11:48 AM	#2
chuckster57 Site Team Join Date: Jul 2014 Location: Modesto Posts: 20,351	Welcome to the forum If it’s a suburban brand the element is underneath the plastic oval cover, located near the bottom left corner. If it’s an Atwood, the element is located on the back side of the unit. 1 1/2” socket is needed and it’s a tight fit. Best thing is to take the old one out and match the wattage that should be stamped on the part. Be sure it’s actually bad before spending all the time and effort. __________________ 2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel. Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS. Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.