Ok. Your converter will be a stand alone unit, should be behind that breaker panel. There will be 2 40A fuses on the back of the converter where the large gauge leads are. Don’t just look at them, test them.
If your trailer is a fifth wheel, and the panel is near the steps up to the bedroom, it might be easier to access the converter from the storage area, just remove the screws holding the rear wall.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|