[jsmith948]

On our Laredo, the vinyl screw cover on the gutter over the galley slide was stretched too tight when installed at the factory (my opinion) and subsequently pulled off the end anchor screw then pulled back so it looked like it was about a foot short. Don't know if they will normally shrink that much or if the screw cover was actually cut to short and they just stretched it to fit. Replaced the strip with new - all good - cheap and easy fix. Either fold the strip back on itself to double the thickness (so the screw won't tear through again) or use the little aluminum end pieces made for that purpose - they can be ordered from Trekwood.