Quote:
Originally Posted by motu59
recently while camping our water flow from the City water connection stopped, nothing in the kitchen nor bathroom.
I replaced the pump, same issue.
I replaced the unit that connects to the hose, same issue.
So what happens. When I first connect the hose, it seems to fill all the lines and the water flows to the faucettes, but within the first minute, the water flow seems to slow and then come to a complete stop.
If there is water in the Fresh water tank, and I turn on the pump, the water flows fine. No issues.
Anyone experience such a thing. Any ideas to figure out what this issue might be. Thanks
|
motu59, Welcome. First take a sec and go to the UserCP at the top of each page in the black band on the left and create and save a signature with year, make and model of your camper and the same for your tow vehicle. Answers to your questions will have a better chance of being contextual. Next, why replace your water pump if you are connected to city water? It should not be on when connected to city water. Third, have you cleaned out your aerators that are located on the water tap ends? They unscrew and often crud can get in if you don't filter your incoming water or there may be crud in the pex that accumulates. Anyhow, good luck.