The rinser is only for the black tank, and if the anti siphon valve is plumbed backwards, water simply won’t flow. It’s possible that it was not installed at the proper angle or even sideways which would allow it to leak.
I would find it, most likely in the places mentioned, and make sure the valve is upright and the hoses are tight. If that doesn’t fix it, then you need to look at the connection behind the wall where you hook up the hose.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|