Quote:
Originally Posted by Bugsmema
Can I ask, what do you do when it’s in “out of stroke”?...!
|
It seems when it's out of stroke, to reset is always slightly different, or else I can just never remember how I did it before.
But the sequence goes something like this.
Turn the control panel off and then back on.
Put the control in Manual mode.
Retract all your jacks manually.
At this point, I go ahead and hitch using the front jacks in manual mode.
After hitching, retract, manually, all your jacks at least 6 inches, but do not extend much more than that.
You then press and hold the retract button and this will rehome the jacks.
They will all retract. I like to turn the control off again at this point, and start all over with the total unhitching process.
Here's a link to explain how to operate in manual mode:
Click here
After that, retract all Jacks and it's reset.
Just make sure you hitch up first. After resetting, level the trailer as much as possible with boards under the tires and blocks under the jacks so they do not extend any further than the length from the tires to the ground. If you have to build up blocks under one jack a foot high, then that's what it takes, if you are on really unlevel ground.