|
Before you pull the motor out, try the manual drive option. looking at the trailer on the right side , the head of the awning there is a small rubber cap located on top of the plastic cover. remove the cap and underneath you will see a 1/2 inch or so bolt head. use a drill with the right size socket ( or you'll be there all day) and try to extend your awning manually, first left, then right ( loose / tighten ). this turns the awning motor without the use of your trailer. I think once you get the awning out a foot or so you should be able to use your toggle switch to finish rolling your awning out correctly . good luck and I hope this works for you
|