Keystone RV Forums - View Single Post - Free Standing Dinette

**JRTJH** · 09-17-2018, 01:08 PM

You say that it comes loose. Isn't the pedestal bolted to the floor? Our table has never moved from the factory position. The only issue we've ever had is the chairs occasionally "migrate" from the travel position on very rough roads. Normally, we don't secure the chairs and they are in the same place as when we started.

Anyway, your table should be bolted to the floor of the slide. If it's not, then I'd address that first. Is your trailer still under warranty? Have you discussed this with the dealer?

09-17-2018, 01:08 PM	#13
JRTJH Site Team Join Date: Mar 2011 Location: Gaylord Posts: 26,974	You say that it comes loose. Isn't the pedestal bolted to the floor? Our table has never moved from the factory position. The only issue we've ever had is the chairs occasionally "migrate" from the travel position on very rough roads. Normally, we don't secure the chairs and they are in the same place as when we started. Anyway, your table should be bolted to the floor of the slide. If it's not, then I'd address that first. Is your trailer still under warranty? Have you discussed this with the dealer? __________________ John 2015 F250 6.7l 4x4 2014 Cougar X Lite 27RKS