Quote:
Originally Posted by Quiroule
As I am sitting inside listening to the Florida rain, I am considering the acquisition of a Fan-Tastic fan.
Now, if I remove the 4 screws holding the inside part of the actual vent, will-I be able to see if I have electricity close by, without removing the part on the roof.
How can-you remove the speakers from the ceiling?
Out of curiosity, anyone knows the thickness of the plywood used on the roof.
Thanks
|
To remove the inside trim from the vent you may have to also remove the handle. On most models you will be able to see or reach in on at least two sides. If you have an unswitched light close by the power is there.
Most Cougar roofs are 3/8" plywood.
Each model of speaker used will mount differently. Trim will pry off to expose screws.
__________________
 Hank & Lynn
2007 Cougar 290RKS, E-Z Flex, 16" XPS RIBs ( SOLD  .. Gonna miss her ... looking for new 5r)
2004.5 Dodge 2500 QC, LB, 5.9HO, WestTach gauges, Ride-Rite
|