Keystone RV Forums - View Single Post

wiredgeorge · 04-05-2021, 02:28 PM

I replaced the male end of my 30A shore power cord because the 2002 original had gotten a bit heat deformed. Did this a couple years ago. Put another on and connections are tight. It is starting to get a bit warm and the plastic shows slight deformation. Anybody know why this would happen. Connections at the converter are snug and the plug was installed properly and inside connections snug. Any recommendations for a new plug? This is what I am talking about:

https://www.ebay.com/itm/Male-30-Amp...oAAOSwr85amzFK

04-05-2021, 02:28 PM	#1
wiredgeorge Senior Member Join Date: Nov 2017 Location: Mico, TX Posts: 7,467	30A male plug recommendation I replaced the male end of my 30A shore power cord because the 2002 original had gotten a bit heat deformed. Did this a couple years ago. Put another on and connections are tight. It is starting to get a bit warm and the plastic shows slight deformation. Anybody know why this would happen. Connections at the converter are snug and the plug was installed properly and inside connections snug. Any recommendations for a new plug? This is what I am talking about: https://www.ebay.com/itm/Male-30-Amp...oAAOSwr85amzFK __________________ wiredgeorge Mico TX 2006 F350 CC 4WD 6.0L 2002 Keystone Cougar 278 2006 GL1800 Roadsmith Trike