I carry one of my two Harbor Freight 12Ton jacks, usually the low version along with wood blocking. These are a bit of overkill but they are occasionally used for other purposes - they were bought originally to jack the garage wall so I could install a new stud plate. They are inexpensive, store in their original 5x5x8 boxes and work well.
A 4T jack. IMHO, will work just fine if it will be a dedicated tool just for tire changes but for a few bucks more - bigger is (usually) a better choice
I would suspect that the OPs spread axle TT would not be a good candidate for that Anderson ramp gadget
|