View Single Post
Old 10-04-2022, 05:33 PM   #6
ShotgunZ71
Junior Member
 
Join Date: Aug 2022
Location: Rural USA
Posts: 25
Yes, I used the housing that came with the Furrion. The wiring is all there under the little prep cap. I used self-tapping screws and just centered the camera housing over the existing hole/wiring. Once that was done, I wired and mounted the camera, then adjusted the angle. I try to angle down just enough to see the edge of the bumper, but a good field of view behind it.
__________________
2021 Chevrolet Silverado 3500HD
ShotgunZ71 is offline   Reply With Quote