Keystone RV Forums - View Single Post

Laredo Tugger · 07-22-2021, 04:55 AM

Thanks to both "Chuck's" for your responses.
Reason for the question was, the last time I was at the (my) dealership for service I asked the tech about lifting the trailer with the built in jacks and he said not to because of frame bending. On my most recent service (that I did) I lifted each wheel individually with a bottle jack under the axle in between the U-bolts directly under the spring assembly.
Based on your previous post, either method is acceptable, correct?
Thanks
RMc

07-22-2021, 04:55 AM	#9
Laredo Tugger Senior Member Join Date: Apr 2018 Location: South US Posts: 712	Thanks to both "Chuck's" for your responses. Reason for the question was, the last time I was at the (my) dealership for service I asked the tech about lifting the trailer with the built in jacks and he said not to because of frame bending. On my most recent service (that I did) I lifted each wheel individually with a bottle jack under the axle in between the U-bolts directly under the spring assembly. Based on your previous post, either method is acceptable, correct? Thanks RMc __________________ 2018 Ram 3500 SRW Aisin Trans. HO CTD Air Lift Bags -Curt 16K Slider Hitch 2017 Laredo 350 FB