If there was any wiring installed at the factory, normally you would see a round cover on the roof.
Depending on where you locate the dish, wiring and coax can be routed down the refer cabinet, or just behind a roof vent. You may need to remove trim and pull back some walls. 6-8 hours isn't too far off so leave yourself lots of time.
__________________
2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.
Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
|