Quote:
Originally Posted by Steveo57
I took the rats nest of wires and auto reset breakers on the tongue and moved it all into a box that's sealed up. It's all of protected from the weather now and much neater. I also traced out the wiring as I redid it all so I now have a nice wiring diagram of the trailer for future reference.
Here's some before and after pictures.
And pulling the underbelly down is not that bad. They used power nails and screws on mine. The power nails can sometimes be pulled out using an impact driver with the appropriate socket jammed on the head of the nail. Otherwise I used a prybar, catsclaw, hammer, vice grips, grinder combo to get them off. I replaced them all with screws when I closed it back up.
|
This is awesome! Thank you so much for the photo's. Where did you get that box?
Thanks again!