Keystone RV Forums - View Single Post

Montana318RE · 11-24-2021, 04:12 AM

What threw me off was there is only one #6 wire on the negative side of the battery and that goes to the frame, no other wires are attached to the battery negative post. I imagine if all negatives thru out the 5W are all bonded to the frame then by removing the #6 white ground wire from the negative side of battery and attaching to the P- of shunt and add another wire from the B- side of shunt to negative of battery like Mikec557 described in theory all grounds have to flow thru the shunt, correct?

11-24-2021, 04:12 AM	#5
Montana318RE Junior Member Join Date: Dec 2017 Location: Big Pine Key Posts: 11	What threw me off was there is only one #6 wire on the negative side of the battery and that goes to the frame, no other wires are attached to the battery negative post. I imagine if all negatives thru out the 5W are all bonded to the frame then by removing the #6 white ground wire from the negative side of battery and attaching to the P- of shunt and add another wire from the B- side of shunt to negative of battery like Mikec557 described in theory all grounds have to flow thru the shunt, correct? __________________ 2006 Chevrolet Silverado 3500 LT CC LB DRW 4x4 Duramax/Allison LBZ Reese Titan 20K 2013 Montana High Country 318RE Big Pine Key, Florida