Thread: Water input
View Single Post
Old 10-11-2016, 07:09 AM   #9
chuckster57
Site Team
 
chuckster57's Avatar
 
Join Date: Jul 2014
Location: Modesto
Posts: 20,357
Re: Water input

Sewer flush is a straight shot to the black tank. Just hook up a hose (NOT your drinking water hose) and turn on the water. There is a sprayer in the tank that rinses all the yuck. Make sure you open the black tank dump valve, or you will fill the tank and push unwanted liquid into unwanted places.

When I run my rinser I turn on the water, dump my tank and then close the valve and let the sprayer do its thing for about 3 minutes. Then I dump again, looking through a clear connector to see if it's clean. If it isn't I repeat the process.
__________________

2012 Copper Canyon 273FWRET being towed by a 1994 Ford F350 CC,LB,Dually diesel.
Airlift 5000 bags, Prodigy brake control, 5 gauges on the pillar.Used to tow a '97 Jayco 323RKS.

Now an RVIA registered tech. Retired from Law enforcement in 2008 after 25+ yrs.
chuckster57 is offline   Reply With Quote