|
BSHGTO and I had this discussion on another site.
As a caution to others considering this mod, I've put an X factor on the center hanger but have interference at the other two hangers - the gas line on the front and the galley tank drain on the rear hangers. Since I'll be doing other work on the suspension, will be rerouting the gas line then making up my own design hanger brace for the rear. Also. be aware that you have to replace the hanger bolt with their supplied wet bolt.
A personal comment here - these X Factor cross members would be better if they were main trailer frame supported but then you might need a heavier hanger. This design will at least dampen some of the flex ( I sure wish these current trailers had a heavy forged hanger like my long gone Kountry Aire had)
|