|
So as I stated earlier, I’ve been having the same intermittent issue, ironically the same year and model as the OP.
Went to put slide in yesterday and nothing. No click, no hum, just dead. All other 12v working fine. No power at the generic slide control box. I found that there is no fuse in the panel for that. Power is run directly out to the circuit breaker on tongue by the battery, These are “waterproof” breakers with red covers. The main issue I have is they have so many wires in and out of these things that the covers can’t seal. My terminals were all rusty and corroded again. Once cleaned up, side works again.
|